High Pressure Electric Air Pump Compressor Pump 30MPA 4500PSI UK Stock

30MPA, 4500PSI, 220V high pressure electric air pump
When the compressor is working, the cooling system will work at the same time
The machine must work with wear resistant hydraulic oil, so it is needed to pay attention to the level of oil
must Replace breathing plug
If the machine vibrates violently, please add pad or towel under the compressor

Specifications:
Size: 36* 18 * 37CM( L * W * H)
Net Weight: 16.2KG/35.72LBS
Power: 220V, 50HZ
Motor Power: 1.8KW
Charge pressure: 30MPA
Air flow rate: 80 L/MIN
Pressure Capacity: 0-40 MPA
Working Pressure: 300BAR 30MPA 4500PSI
Cooling System: Water cooling
Color: Blue

Operation instruction:
1. Connect 2 cold water pipes and connect them to the water pump. (Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using.)
2. Install the hose at the air outlet.(Note: gasket is needed, or air leakage might exist.)
3. Immerse the water pump in water and switch on the power.
4. Connect the container need to be inflated.
5. Screw up the screws of the blow-down valve and pressure relief valve.
6. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur.
7. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine.

Notices：
1. The product should be placed at a place that it couldn’t be touched by children.
2. Please do not use it in moist and flammable place.
3. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.
4. Make sure the socket could withstand a current greater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.
5. Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature.
6. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely.
7. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled.
8. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.

Package Content：
1PC × 30Mpa Electric Compressor Pump
2Pcs × Pressure Relief Screw
1Set × Hose Female
1PC × Water Pump
1PC × Air Cock
1PC × External Filter
2Pcs × Water Pipe
1PC × Wearing Parts
1Set × O-Ring
1PC × Breath Nozzle
5Pcs × Explosion-proof valve
3Pcs × Rubber gasket
2 Bags × Air filter cotton pad
1PC × Anti-vibration pad
1 pair of gloves
1 × English Manual